The Rules and How to Break Them. No.5

Advertisement

Rule 5: Double-breasted suits add breadth to a man. They should only be worn by those with slim builds.

duke-windsor-buttonedTo reiterate the philosophy behind this series: All rules are there for a reason. They become rules because they have practical advantages. But there’s nothing wrong with breaking them, as long as you understand these practical advantages.

A double-breasted suit adds breadth to a man because it creates horizontal lines. Rather than going straight down, the lapels run across the body. The buttons, whether there are four or six, create horizontal lines as well. They create a box that adds squareness to a man.

The peak lapels also create breadth because they point outwards – no matter how high on the collar they appear, they add another horizontal line across the top of them.

This is all fairly straightforward. Horizontal lines create breadth – just like belts, checks and cuffs on trousers. But consider those lines for a minute and think how their breadth-giving properties could be minimised.

(In other words, consider the practical advantages behind the rule – why they are good for a thin man – and play with them.)

A double-breasted lapel that cuts across the chest and ends at a point above a man’s natural waist (so just above his belly button) will create quite a flat line. But if it ends lower down, buttoning below the natural waist or even on the hips, the line becomes more vertical.

Now narrow the distance between the buttons. The smaller the overlap of the double breast is, the more vertical the line of the lapel will be and the more its broadening effect will be reduced. And the shorter the horizontal line between the buttons will be.

Obviously you don’t want to push this too far, otherwise you might as well have a single-breasted jacket. But slightly adjusting both of these things will make the jacket more slender in a very subtle way.

Lastly, a personal quirk of mine is only having two buttons on a double-breasted suit. So just the two buttons required to fasten the jacket, and no more. It is a little bit individual and it means there is only one horizontal line, not two or three.

So there you go. A double-breasted suit does not necessarily make a man too broad. By lengthening the lapel, making it more vertical and reducing the buttons you can create a double-breasted jacket that a large man can wear and will only give him broad shoulders – not a big stomach.


Advertisement

Simon Crompton is a journalist and a style enthusiast living in London, who blogs at permanentstyle.blogspot.com. He has too many suits.

Comments

  1. Dave McLeod says:

    ….And funnily enough I was just looking this juicy number from Reiss;

    http://www.reiss.co.uk/shop/mens/formal_jackets/triumph/black/

    You might have just persuaded me to line their coffers a little more.

  2. Terry says:

    Simon, would you be willing to post a picture of one of your DB suit jackets?

  3. Simon Crompton says:

    Terry,

    Sure, I will try to work something out with the camera. Best to check the blog site at http://www.permanentstyle.co.uk

    Thanks

  4. Thanks. This was helpful. Look forward to wearing double-breasted again with said adjustments. Can this be done by a tailor off the rack?

  5. Jim K says:

    Don’t mess with proportion when it comes to buttons. The Duke’s clothing looks fresh today precisely because it is perfectly classic. Alan Flusser confirms, however, that a DB jacket with lapels that roll below the waist minimize girth and maximize height.